Lowongan Kerja Teknik RekindWorleyParsons
Saturday, September 20, 2014
1. LEAD PROCESS ENGINEER
Responsibilites :
- Lead and supervise Contractors activities in development of deliverables in process engineering discipline during Contract period.
- Serve as SME (subject matter expert) in process engineering discipline during Contract period, including utilizing Contractors corporate internal and/or external professional networking as necessary.
- Implement QA/QC plan including internal squad check process for process discipline deliverables, prior to submission to Company.
- Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on process engineering discipline during performance of Engineering Services.
- Report to and assist Superintendent Engineering for execution of Off-site and On-site Engineering Services during the Contract period.
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 15 years working experience in process engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with 10 years of which at senior dan lead position. Furthermore, several years of which shall cover following aspects:
- Minimum experience as Lead Process Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
- Minimum 5 years working experience outside of his/her home country, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, 3D designers, designers, drafters, etc.) with diverse nationalities.
- Alternative for Article (b) above for Group III National only, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
- The candidate shall have thorough knowledge on the process engineering discipline and broad knowledge on various aspects, such as: process engineering software (refer to Attachment A5), internationally recognized engineering codes & standards, etc.
- The candidate shall have extensive experience in facilitating and/or supporting HAZOPS and VIPs sessions, such as: Value Engineering, etc.
- The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.
2. SENIOR PROCESS ENGINEER
Roles and Responsibilities
- Prepare and complete process engineering design, coordinate Contractors activities in development of process engineering deliverables.
- Provide technical consultation for Facility construction and commissioning, if its required to support Companys related projects
- Work closely with Companys user(s) during review sessions of deliverables
- Provide mentoring on related process engineering aspects to Contractors Process Engineers to enhance their competency to provide risk management (safety and reliability) services to the various RekindWorleyParsons Safety & Risk Management clients.
- To be responsible to the performance of projects assigned to both in terms of technical capability and also commercial performance of the project.
- To promote RekindWorleyParsons Safety & Risk Management to clients to achieve follow-on work with existing clients and new work with prospective clients.
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 8 years working experience in process engineering works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
- Address and co-ordinate safety in Design Requirements.
- Perform Inherent Safety Review.
- Knowledge of HAZOP workshops, Fire & Explosion Analysis, Fire Protection related studies and Formal Safety assessments.
- Identify Safety Critical Element & Performance Standards.
- Identify Design Requirements for Safety Systems.
- Perform Risk Assessment Studies including QRA, FERA, ESSA, F&G, Dropped Object,
- Perform Loss Prevention Studies includes Hazardous Area Classification, EERA.
- Perform fire water system design including fire water demand calculations and steady-state fire water network hydraulic modelling
- Have a sound understanding of Active and Passive Fire Protection Design
- Estimation of work scopes & CTR.
- The candidate shall have thorough knowledge on process engineering and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
- The candidate shall have high mentoring & coaching skills.
Work Location: Jakarta
3. SENIOR DESIGN ENGINEER PIPING
Responsibilites:
- Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
- Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
- Work closely with Companys user(s) during review sessions of deliverables.
- Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
- The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
- For piping discipline, the candidate shall have sufficient experience in implementing 3D modeling for piping design and familiar with 3D baseline software (PDMS and Naviswork Review).
- The candidate shall have high mentoring & coaching skills.
4. SENIOR DESIGN ENGINEER MECHANICAL
Responsibilites:
- Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
- Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
- Work closely with Companys user(s) during review sessions of deliverables.
- Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
- The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
- For mechanical discipline, the candidate shall have suficient experience in providing technical specification & datasheet for procurement process, both for static or rotating equipment, and familiar with all associated codes & standards, such as: API610, API676, ASME-VIII Division 1/2, API650, etc.
- The candidate shall have high mentoring & coaching skills.
5. PROJECT CONTROLS SPECIALIST - PLANNER
Roles and Responsibilities
- Coordinate and execute project controls Services for Companys projects both at individual or portfolio level which shall include but not limited to:
- Working with Contractors Scheduler to develop and update master schedule (resources loaded, WBS based), resources planning / prioritization / leveling, etc.
- Working with Contractors Cost Engineer to perform cost control & forecasting.
- Coordinate with Companys contractor to ensure timely submission of weekly report including review its accuracy.
- Work closely with Company and Companys contractors during performance of project controls services for Companys projects.
- Develop and maintain Contractors processes and procedures related with project controls.
- Perform project scheduling Services for Companys projects both at individual or portfolio level which shall include but not limited to: development & update of project schedule (up to levei-4), collaboration with Contractors Project Controls Specialist to develop and update master schedule (resources loaded, WBS based), critical path identification in project schedule, etc.
- Work closely with Company and Companys contractors during performance of project scheduling services for Companys projects.
- Develop and maintain Contractors processes and procedures related with project scheduling.
- Prepare detailed schedule for project execution covering all associated activities (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, etc.), interconnection among activities and determining critical path activities, by referring to historical data and/or appropriate duration benchmarks and/or professional judgment
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 10 years working experience in engineering, construction and project controls, with minimum 5 years of which are for oil & gas or petrochemical handling projects and/or facilities.
- The candidate shall have thorough knowledge on various project controls practices and related codes & standards, including associated software.
- The candidate shall have broad knowledge on project scheduling techniques and various cost estimating methods for engineering and construction works.
- The candidate shall have high skill for facilitation & coordination, and networking.
6. PROJECT CONTROLS SPECIALIST – COST ESTIMATOR
Roles and Responsibilities
- Coordinate and execute project controls Services for Companys projects both at individual or portfolio level which shall include but not limited to:
- Working with Contractors Scheduler to develop and update master schedule (resources loaded, WBS based), resources planning / prioritization / leveling, etc.
- Coordinate with Companys contractor to ensure timely submission of weekly report including review its accuracy.
- Work closely with Company and Companys contractors during performance of project controls services for Companys projects.
- Develop and maintain Contractors processes and procedures related with project controls.
- Perform cost estimating & control Services for Companys projects both at individual or portfolio level which shall include but not limited to: cost estimating, cost control & forecasting, etc.
- Prepare construction cost monitoring report for project executed by Companys contractors and supervised by Contractor. This include in providing monthly project cost accrual for Companys contractor and Contractor.
- Work closely with Company and Companys contractors during performance of cost estimating & control services for Companys projects.
- Working with Contractors Cost Engineer to perform cost control & forecasting
- Develop and maintain Contractors processes and procedures related with cost estimating & control.
- Prepare detailed cost estimate for project execution covering all associated cost components (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, project overheads, etc.) by using budgetary quotations for major equipment and by referring to historical data and/or appropriate cost benchmarks and/or professional judgment.
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 10 years working experience in engineering, construction and project controls, with minimum 5 years of which are for oil & gas or petrochemical handling projects and/or facilities.
- The candidate shall have thorough knowledge on various project controls practices and related codes & standards, including associated software.
- The candidate shall have broad knowledge on project scheduling techniques and various cost estimating methods for engineering and construction works.
- The candidate shall have high skill for facilitation & coordination, and networking.
7. DESIGN ENGINEER ELECTRICAL
Roles and Responsibilities
- Prepare and complete development of related discipline engineering deliverables.
- Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
- Work closely with Companys user(s) during review sessions of deliverables.
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
- The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software (refer to Attachment A5) and codes/standards.
8. DESIGN ENGINEER PIPING
Roles and Responsibilities
- Prepare and complete development of related discipline engineering deliverables.
- Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
- Work closely with Companys user(s) during review sessions of deliverables.
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
- The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software (refer to Attachment A5) and codes/standards.
9. DESIGN ENGINEER INSTRUMENTATION & CONTROL
Roles and Responsibilities
- Prepare and complete development of related discipline engineering deliverables.
- Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
- Work closely with Companys user(s) during review sessions of deliverables.
- Minimum education is to possess an engineering degree (S1) or equivalent.
- The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
- The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software and codes/standards.
10. DESIGNER INSTRUMENT AND CONTROLS
Roles and Responsibilities
- Discuss with Contractors Senior Engineer and/or Design Engineer with respective discipline, to determine number of drawings required for each specific project/work and to define function & objective of each drawing.
- Plan and prepare design sketches of Facility design in accordance with its function and objective as basis for development of design drawings.
- Direct and guide Senior Drafter and/or Drafter in development of design drawings with CADD.
- Conduct field data collection and verification to ensure drawings accuracy and completeness.
- Minimum education is to possess an engineering diploma degree (D3) with 8 years working experience or senior high school graduate (SMU) with 12 years working experience, both in design drafting by using CADD.
- Minimum 6 years of which (with D3 degree) or 9 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
- The candidate shall be familiar with design practices and engineering codes & standards in respective discipline.
- The candidate shall be fully conversant with CADD baseline software: Intergraph Microstation version 8i.
Work Location: Jakarta
Jika anda tertarik dengan Lowongan Kerja Teknik RekindWorleyParsons , silahkan siapkan RESUME dalam bentuk PDF anda kemudian kirim ke :
lica.rizawaty@rekindworleyparsons.com dan
ayu.anindita@rekindworleyparsons.com
dengan subject judul lowongan yang anda pilih.
Please dont attach other document besides your own resume.
Lowongan Kerja Teknik »
Lowongan Kerja Bachelor |
Lowongan Kerja Desain |
Lowongan Kerja Diploma |
Lowongan Kerja Experienced |
Lowongan Kerja Oil and Gas |
Lowongan Kerja Semua Jurusan Teknik |
Lowongan Kerja SMK / STM
